Ge Security 60 983 Atp1000 User Manual

Ge Security 60-983 Atp1000 Alphanumeric Touchpad Manual
Ge Security 60-983 Atp1000 Manual
Ge Security 60-983 Atp1000 User Manual
Ge Security Interlogix 60-983 Atp1000 Manual

60-983 60-983 ATP1000 Alphanumeric Touchpad: Large 2X16 Liquid Crystal Displayw/Adjustable Contrast and Brightness. Swing-Down, Removable Door. Police, Fire and Auxiliary Panic Buttons. Allows for On-Site Installer Programming GE Security offers a ATP 1000 Alphanumeric Touchpad Click here to contact us for more product information or technical. View and Download GE Interlogix ATP1000 installation instructions manual online. ATP1000 Touch Panel pdf manual download. Page 6 Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by GE Interlogix can void the user’s authority to operate the equipment. FCC Part 15 Class B This equipment has been.

Advertising

Connecting the touchpad for system

programming only

For installations that don’t include an alphanumeric touchpad

as a permanent part of the system, you can connect one for

Ge Security 60-983 Atp1000 Alphanumeric Touchpad Manual

system programming to the Programming Touchpad Header

on the panel.

To do this you must first connect a Programming Touchpad

Cable (60-791) to the touchpad wires (see Programming

Touchpad Cable Installation Instructions—466-1604, included

with the cable). Then, use the appropriate procedure for

connecting the touchpad.

To connect a programming touchpad to a Concord

Express, Concord, or Concord Ultra panel with software

version 2.0 or later:

1. With the panel powered up, connect the cable to the

Programming Touchpad Header (see

Caution:

When using the ATP1000 as a programmable

touchpad, be careful not to touch the circuit board exposed on

the pack.

Figure 4. Connecting a Programming Touchpad—Concord
Express Shown, Concord Similar

Programming Touchpad Header Pins

2. Activate the touchpad by pressing 8 + CODE + 0 + 2.

3. Enter program mode by pressing 8 + installer/dealer

CODE + 0 + 0 and program the panel using the panel

Installation Instructions.

4. When programming is completed, simply disconnect the

programming touchpad.

To connect a programming touchpad to a Concord panel

with software versions 1.0–1.6:

1. Disconnect AC and backup battery power.

2. Connect the cable plug onto the panel Programming

Touchpad Header pins (see

3. Reconnect the AC and backup battery power. The

touchpad briefly displays ***********, SCANNING BUS

DEVICES, then shows a time and date display.

Note: If the touchpad does not respond as described in

step 3, there may be a bus conflict. To correct this, change

the touchpad unit number as described in the section

“Changing the Touchpad Unit Number.”

Removing the programming touchpad from Concord

panels with software versions 1.0–1.6:

To prevent a trouble condition, you must delete the

programming touchpad unit number from Concord panel

memory before disconnecting it.

1. After programming is completed, return to the

ACCESSORY MODULES menu, then press É. The

display should read BUS DEVICES.

2. Press É. The display shows the lowest unit number and its

device name.

3. Press A or B until the display shows the programming

touchpad unit number.

4. Press D to delete the device and its unit number from

panel memory. The display shows:

Ge Security 60-983 Atp1000 Manual

UNIT - TYPE

14-NONE

5. Exit program mode and disconnect the programming cable

from the panel header.

Testing

Note: Contact the central monitoring station before

activating alarms, to avoid dispatching local police and fire

departments.

Test the touchpad by arming/disarming the system, activating

the touchpad panics, bypassing sensors, and by turning chime

and lights on/off to verify correct operation. Refer to the panel

User’s Manual for complete system operating instructions.

Adjusting display brightness and contrast

The touchpad display can be adjusted for easier viewing to

help compensate for lighting conditions in the touchpad

location.

The brightness adjustment lightens or darkens the background.

The contrast adjustment lightens or darkens the text.

ATP1000 Touchpad/Display Installation Instructions

Advertising

Popular Brands

Popular manuals

Atp1000 touchpad/display installation instructions, Product summary, Installation

Advertising

ATP1000 Touchpad/Display Installation

Instructions

Product summary

The ATP1000 lets you control all programming and operation
of compatible security systems (see the “Specifications”
section).

The large 2-line, 16-character display provides easy to read
messages to indicate the current status of the system. The
touchpad includes police, fire, and auxiliary panic buttons that
can be activated anytime. A built-in speaker provides alarm,
status, and button-press sounds. A swing-down door reveals a
label with basic system operating commands. The door can be
removed by simply opening it past its stop point. The door can
also be reattached later if desired.

Tools and equipment needed

•

4-conductor, 22- or 18-gauge wire

•

Screwdriver

•

#6 screws and anchors (included)

•

Panhead screws for gang box installation

•

Saw or utility knife for cutting wallboard

Installation

Installation guidelines

•

Mount the touchpad in an environmentally controlled area
(32°F to 120°F/0°C to 49°C).

•

When mounting the touchpad, allow at least 3 inches
below it for the swing-down cover.

•

Do not exceed the maximum available power. See the
panel installation instructions for maximum available
power.

•

Table 1

describes the power used by the touchpad.

•

Table 2

describes the maximum wire lengths allowed

between the touchpad and the panel.

Table 1. Touchpad power usage
Current (mA)

Conditions

110

Maximum alarm current with the buzzer sounding

and the touchpad illuminated from a button press

Typical operation

Power saving mode (no panel AC power)

Table 2. Maximum touchpad wire lengths
Wire Gauge (Unshielded

or Shielded)